Automotive Engineering

Advanced Mechanics | Lecture/Practical (IL) | Coursecode: M230680102

Language of instruction English

Advanced Mechanics

4.00

ECTS

3.00

SWS

Introduction to Analytical Mechanics: statements of the principle of virtual work, d’Alembert’s principle and Lagrange’s equations of the 2nd kind and their application to particles, systems of particles, rigid bodies and systems of rigid bodies; application of energy principles and variational methods in the strength of materials

Applied Engineering Mathematics 1 | Lecture/Practical (IL) | Coursecode: M230680101

Language of instruction English

Applied Engineering Mathematics 1

4.00

ECTS

2.00

SWS

Linear Systems (Advanced Linear Algebra and its application in Equilibrium and Dynamical Systems), Equilibrium Equations (Constraints and Lagrange Multipliers, Structures in Equilibrium, Electrical Networks), Equilibrium in the Continuous Case (Differential Equations of Equilibrium, Laplace’s Equation and Potential Flow, Equilibrium of Fluids and Solids, Calculus of Variations), Numerical Methods.

Control Systems I – Sensors and Actuators | Lecture/Practical (IL) | Coursecode: M230680103

Language of instruction English

Sensors and Actuators

3.00

ECTS

2.00

SWS

Sensors and actuators are parts of control systems. Knowledge about the functions performed by engine and vehicle controls are the basis for the discussion of sensors and actuators. The objective is to provide an overview of these elements and to impart knowledge on how to use them.

Control Systems II – Digital Control Engineering | Lecture/Practical (IL) | Coursecode: M230680105

Language of instruction English

Digital Control Engineering

3.00

ECTS

2.00

SWS

Design of linear digital and continuous feedback and control systems in the time domain. Quality criteria for control systems. State space control and observers. Exercises using modern CAE-Tools (Matlab, Simulink) support the lecture and give practical applications.

Engineering Project 1 | Project Thesis (PA) | Coursecode: M230680106

Language of instruction English

Engineering Project 1

6.00

ECTS

3.00

SWS

Approaches to solving interdiciplinary technical problems. Results-oriented group work. Conceptual design of vehivles, vehicle parts and function groups Compilation of relevant documents: CAD models, drawings, parts lists (BOM).

Engineering Project Management | Lecture (VO) | Coursecode: M230680108

Language of instruction English

Engineering Project Management

2.00

ECTS

2.00

SWS

• Agile Management • Change Management • Quality Management • Risk Management

English for Scientific Studies | Seminar (SE) | Coursecode: M230680109

Language of instruction English

English for Scientific Studies

2.00

ECTS

2.00

SWS

ESAP: understanding subject-specific literature and lectures; formulating questions (asking for clarification, responding to clarification); making effective contributions to lectures/seminars. This course is also closely linked to the first-year engineering project and covers the following topics: – Engineering design process and associated language – Project management and associated language – Engineering project documentation – Customer meetings – Comparing automotive systems and engineering solutions – Justifying engineering decisions

Hydraulics and Pneumatics | Lecture (VO) | Coursecode: M230680107

Language of instruction English

Hydraulics and Pneumatics

2.00

ECTS

2.00

SWS

This course deals with the structure and fundamentals of oil-hydraulic and pneumatic systems, their applications as well as their advantages and disadvantages. The course covers the following topics: • Properties of hydraulic fluids • Hydraulic power transfer and efficiency • Pumps, motors and cylinders • Directional control valves • Pressure and flow valves • Fundamentals of proportional and servo valve technology • Plant accessories (lines, screw fittings, accumulators, filters, coolers, etc.) • Fundamentals of pneumatics • Generation and distribution of compressed air • Components of pneumatic drive units • Fundamentals of electropneumatics

Machine Dynamics / Acoustics | Lecture (VO) | Coursecode: M230680104

Language of instruction English

Machine Dynamics / Acoustics

4.00

ECTS

2.00

SWS

Kinematics of the crank mechanism; Forces, moments and balancing methods in single and multi-cylinder engines; Kinematics of cam drives and followers; forced oscillation in one- and two-mass systems; System modeling for simulation Basic terms and principals of technical acoustics related to the application in automobiles and engine design from the basics to application examples

Advanced Drive and Propulsion Technology | Lecture/Practical (IL) | Coursecode: M230680203

Language of instruction English

Advanced Drive and Propulsion Technology

4.00

ECTS

3.00

SWS

Introduction on overall powertrain developments trends with specific focus on the global market drivers (CO2/xEV legislations) and their technical background, outlining an automotive industry roadmap. Electric propulsion systems – Electric mobility applications and their sustainability context – Main operating principle and characteristics of BEVs – BEV powertrain architectures – Powertrain design/examples – Components of electric drives – Electric motors – Inverters / Converters – Batteries – BEV vehicle design changes – Charging systems Hybrid propulsion systems – Global electrification trends in hybrid vehicles – Dedicated Hybrid Engines – Hybrid architectures with focus on parallel hybrids – 48V hybrid systems – Operating strategies of hybrid vehicles Fuel cell hybrid powertrain summary

Applied Engineering Mathematics 2 | Lecture/Practical (IL) | Coursecode: M230680201

Language of instruction English

Applied Engineering Mathematics 2

3.00

ECTS

2.00

SWS

Applied Engineering Mathematics 2 continues with the discussion of Gilbert Strang’s general framework for Applied Mathematics for the description of equilibrium as well as dynamic systems and the underlying minimum principles. The discussion of one-dimensional elastic systems and of three-dimensional potential fields will be extended to three-dimensional elastic systems. For this purpose, an introduction to tensor algebra and analysis for graduate engineering students will be given that ties directly to vector calculus in orthonormal coordinate systems. Thus, the students will be enabled to tackle many applications, such as the theory of elastic bodies, involving higher rank tensors in any coordinate system.

Continuum Mechanics | Lecture/Practical (IL) | Coursecode: M230680202

Language of instruction English

Continuum Mechanics

3.00

ECTS

2.00

SWS

Introduction to tensors The notion of deformation The notion of stress Conservation principles Constitutive equations

Control Systems II – Signal Processing | Lecture/Practical (IL) | Coursecode: M230680204

Language of instruction English

Signal Processing

2.00

ECTS

2.00

SWS

Methods of frequency analysis and their field of application, get to know different tools for digital signal processing, signal estimation and optimization as well as filter theory and examples of different filters

Control Systems III – Supply and Storage Systems | Lecture/Practical (IL) | Coursecode: M230680206

Language of instruction English

Supply and Storage Systems

2.00

ECTS

1.00

SWS

Architectures and elements of vehicle electrical systems (12V, 24V, 12/48V, high-voltage networks and electrical safety). Modelling of wires, connectors, and battery cells. Heat management of supply and storage systems. Electromagnetic Compatibility (EMC).

Engineering Project 2 | Project Thesis (PA) | Coursecode: M230680205

Language of instruction English

Engineering Project 2

5.00

ECTS

3.00

SWS

Approach to solving interdisciplinary, technical problems. Result-oriented action in the group. Design of vehicles, vehicle parts and assemblies. Creation of related documentation: CAD models, drawings, parts lists.

Leadership and Intercultural Business Practices | Seminar (SE) | Coursecode: M230680207

Language of instruction English

Leadership and Intercultural Business Practices

2.00

ECTS

2.00

SWS

Cultural Awareness Nonverbal Communication Dimensions of Culture Applications of Dimensions of Culture (GLOBE) Motivation across cultures Conflict management and negotiations Leader Types Leadership Theories & Styles

Elective Subjects 1 | Lecture/Practical (IL) | Coursecode: M230680215

Language of instruction English

2 Wheeler Technologies

3.00

ECTS

2.00

SWS

Historical overview; worldwide production numbers and categories; legislation and emission; safety features; formulas for driving resistance and performance demand; design features of the different assembly groups: cranktrain, crankcase, cylinder head, valvetrain and timingdrive, lubrication system, transmission and shifting, final drive Classification of motorcycles; notable design features; main legal requirements; vehicle mechanics: geometric dimensions, longitudinal, vertical and lateral dynamics. Assembly groups: tires, wheels and rims, frames, dampers, wheel suspension, steering, motorcycle brake systems. Motorcycle aerodynamics; Engine; Power transmission

Elective Subjects 1 | Lecture/Practical (IL) | Coursecode: M230680211

Language of instruction English

Applied Multibody Systems

3.00

ECTS

2.00

SWS

MBS-Simulation from Reality to Model; Abstraction of reality to get a Multi-Body-System-Simulation; Grübler-Kutzbach criterion; handling elastic beams; Finding Equations of Motion for nonlinear systems: Lagrange’s Method, Kane’s Method (Principle of Jourdain); Solving complex models using Matlab/Simulink; expected results, Natural Frequencies, Introduction to modern MBS Simulation Tools.

Elective Subjects 1 | Lecture/Practical (IL) | Coursecode: M230680213

Language of instruction English

DoE / Application

3.00

ECTS

2.00

SWS

Design of experiments (DOE) is a systematic, rigorous approach to engineering problem-solving that applies principles and techniques at the data collection stage so as to ensure the generation of valid, defensible, and supportable engineering conclusions. Computer-based examples will illustrate how DoE is applied in practice in an engineering environment.

Elective Subjects 1 | Lecture/Practical (IL) | Coursecode: M230680208

Language of instruction English

Lightweight Design

3.00

ECTS

2.00

SWS

Basics and constraints of vehicle engineering; Lightweight design and principles; Lightweight factors, Basics of Mechanics; Lightweight materials and technologies: Basics, Joining, Production; Lightweight applications in vehicle engineering; Application of the knowledge within group works

Elective Subjects 1 | Lecture/Practical (IL) | Coursecode: M230680217

Language of instruction English

NVH (Noise, Vibrtion, Harshness)

3.00

ECTS

2.00

SWS

• Waves in fluids
• Sound propagation in ducts
• Waves in solid structures: longitudinal, shear and bending waves
• Impedance and mobility concepts
• Transmission of sound through partitions
• Sound radiation from vibrating structures
• Vibration isolation and damping
• Sensors and measuring equipment for NVH
• Perception and effects of noise and vibrations on the human body
• Basics of sound propagation in porous media
• Vehicle noise sources (e.g. electric motors, internal combustion engines, intake and exhaust, auxiliary units, tyres, brakes, etc)
• Vehicle noise and vibration Control

Elective Subjects 1 | Lecture/Practical (IL) | Coursecode: M230680214

Language of instruction English

Race Car Data Analysis

3.00

ECTS

2.00

SWS

Introduction to data analysis. Analysing of straight-line performance, braking behavior, gearing, braking. Evaluation of tire performance. Investigating of roll stiffness distribution and wheel loads. Damper Setup and aeordynamics. Analysing of the driver. Optimization using lap time simulation

Elective Subjects 1 | Lecture/Practical (IL) | Coursecode: M230680209

Language of instruction English

Rail Vehicle Engineering

3.00

ECTS

2.00

SWS

Students obtain on overview of the structure and main functions of modern rail vehicles on the basis of real-world examples. Topics include: – vehicle system technology: structure, main components – propulsion technology: types of propulsion, elctric and non-electric power transmission – braking technology: role of braking technology, fundementals, operating principles, brake control systems – running gear technology: wheel forces, drives, centrifugal forces, axle arrangements – vehicle concepts: tram and light-rail systems, regional multiple-unit trains, double-deck carriages, locomotives

Elective Subjects 1 | Lecture (VO) | Coursecode: M230680210

Language of instruction English

Road Traffic Law

3.00

ECTS

2.00

SWS

Regulations (EU guidelines, ECE regulations, road traffic law), guidelines (emissions and on-board diagnostics, noise, fuel consumption, safety, reliability), types of homologation (complete car, spare parts, accessories), complete homologoation – powertrain, measurement regulations, test sequences (dynamometer, road testing), test algorithms and test systems, documentation, knowledge management, certification.

Elective Subjects 1 | Lecture (VO) | Coursecode: M230680212

Language of instruction English

Strategic Management

3.00

ECTS

2.00

SWS

This course invites students to gain insight into the basics of strategic management. Based on a theoretical introduction to the principles of strategy and strategic management, the importance of strategic analysis is demonstrated. Various tools for analyzing the environment of a company such as Porter’s Five Forces, the PESTEL analysis or tools for analyzing competitors or customers are presented. In addition, the most important tools for analyzing the resources and capabilities of a company are shown. In addition, the basics for developing business and corporate strategies are taught. The course is also dedicated to the implementation and controlling process in strategic management and finally shows strategic management in different contexts. This practice-oriented course actively integrates students through case study work.

Elective Subjects 1 | Lecture/Practical (IL) | Coursecode: M230680216

Language of instruction English

Tire Modeling

3.00

ECTS

2.00

SWS

Vehicle dynamics of multi-track road vehicles with a focus on lateral dynamics and its most important characteristics. Application of the development process from CAD model (CATIA) via MBS-System (ADAMS/Car) to vehicle simulation using veDYNA. Problems will be solved on PC in teams.

Academic Writing and Speaking | Seminar (SE) | Coursecode: M230680307

Language of instruction English

Academic Writing and Speaking

2.00

ECTS

2.00

SWS

Presentation of the results of a Master’s thesis; proper composition of scientific texts (inc. abstracts, literature research, referencing, types of text, register and layout.)

Advanced Vehicle Dynamics | Lecture/Practical (IL) | Coursecode: M230680303

Language of instruction English

Advanced Vehicle Dynamics

3.00

ECTS

2.00

SWS

1) Longitudinal + Lateral Dynamics Potential Analysis: tyre’s behaviour loaded by combined forces; dynamic Wheel load distribution; potential, stability and controllabiltity of a vehicle. 2) Ride: Deep view to spring and damper components, it’s modelling and task in terms of comfort, driving safety and aerodynamic considerations. 3) Vehicle dynamics simulation: Theoretical background of vehicle dynamics simulation. Parameterisation of the vehicle model, adaptation and correlation of the model with measurement data. Examples of lateral and longitudinal vehicle behaviour in open-loop manoeuvres. Lap time simulation, sensitivity analysis and performance optimization. Simulation and energy minimization of electric cars.

Control Systems III – Bus and On-Board Diagnostics | Lecture/Practical (IL) | Coursecode: M230680305

Language of instruction English

Bus and On-board Diagnostics

2.00

ECTS

1.00

SWS

OSI model with examples; overview of vehicle networks (K-Line, CAN, FlexRay, LIN, SAE J1850, MOST,…); transport protocols; diagnosis protocols (KWP2000, UDS, OBD); ASAM Standard calibration protocols (CCP, XCP, …); AUTOSAR concept; development tools; reading and analysis of OBD-diagnosis, analysis of communication networks using modern CAx-Tools; theoretical fundamentals will be consolidated in laboratory using modern application tools.

Driver Assistance Systems | Lecture/Practical (IL) | Coursecode: M230680304

Language of instruction English

Driver Assistance Systems

3.00

ECTS

2.00

SWS

Levels of driver assistance systems, Basics of state-of-the-art assistance systems like: Adaptive Cruise Control (ACC): speed control and distance control; natural acceleration and deceleration behavior Lane Keeping Assist (LKA): Minimal lane deviations; Smooth steering actions; driving line choice Basics of environmental perception: Sensors used in ADAS systems, SLAM Introduction to neural networks

FEM /CFD | Lecture/Practical (IL) | Coursecode: M230680301

Language of instruction English

FEM /CFD

3.00

ECTS

2.00

SWS

Part 1: Mathematical foundations of the Finite Element Method (initial and boundary conditions, weak solutions of partial differential equations, calculus of variations, Galerkin and Rayleigh-Ritz methods), mesh generation (discretisation and assembling algorithms), material models, application of the FEM to both linear and nonlinear, stationary and transient analysis. Computer exercises based on commercially available FEM software. Part 2: Theory of Computational Fluid Dynamics, tutorials using simulation programmes

Human Resource Management | Lecture (VO) | Coursecode: M230680302

Language of instruction English

Human Resource Management

1.00

ECTS

1.00

SWS

Employment law and contracts; application documents, job interviews and assessment centers; personnel planning and development; motivation, teamwork und conflict management; gender und cross-cultural competence.

Internship | Practical (PR) | Coursecode: M230680306

Language of instruction English

Internship

10.00

ECTS

1.00

SWS

Students are introduced to the desired professional activity by means of concrete tasks and practical work in relevant companies and institutions. The internship should serve, in particular, to afford students the opportunity to apply the knowledge and skills acquired in their engineering studies to date. Additionally, students are encouraged to reflect on and evaluate the experience gained from their practical work.

Elective Subjects 2 | Lecture/Practical (IL) | Coursecode: M230680315

Language of instruction English

Automotive Cyber Security

3.00

ECTS

2.00

SWS

1. Introduction to cyber security in the automotive sector: threats, risks and security measures. 2. Network and system architectures in vehicles: CAN-bus, ethernet, etc. 3. Techniques used to hack automotive systems: intrusion, surveillance, interference and manipulation 4. Security systems for vehicles: encryption, access control, monitoring and response. 5. Automotive cyber security regulations and standards: ISO 21434, SAE J3061, etc. 6. Exercises and case studies to apply acquired knowledge. 7. Discussions on current developments and trends in automotive cyber security.

Elective Subjects 2 | Lecture (VO) | Coursecode: M230680310

Language of instruction English

Commercial Vehicles

3.00

ECTS

2.00

SWS

Systematics, main assemblies and components of Commercial Vehicles. Discussion of the application specific main assemblies and components of a commercial vehicle (Frame, cabin, driveline, axles, spring and damper system, steering, ADAS, etc,). If possible, an excursion to the assembly line of RMMV in Vienna closes the lessons.

Elective Subjects 2 | Lecture/Practical (IL) | Coursecode: M230680311

Language of instruction English

Electric Drive and Propulsion Systems

3.00

ECTS

2.00

SWS

Basic differences and characteristics of different electric machines. Understand efficiency or loss characteristics and the impact of the selected motor to the driveability of a vehicle. Difference and usage of continuous and peak power. Define electric motors for specific needs.

Elective Subjects 2 | Lecture/Practical (IL) | Coursecode: M230680309

Language of instruction English

Energy Management and Storage Systems

3.00

ECTS

2.00

SWS

Mechanical energy storages Electrical Energy Storages – Battery Systems – Charging technologies Energy management with electric and hybrid vehicles

Elective Subjects 2 | Lecture (VO) | Coursecode: M230680313

Language of instruction English

Fuel Cell

3.00

ECTS

2.00

SWS

– HYDROGEN Introduction – HYDROGEN Production – HYDROGEN Economy – FUEL CELL Vehicles in Automotive Decarbonised Transportation – FUEL CELL Mobility Applications – FUEL CELL History – FUEL CELL Working Principle – FUEL CELL Types – FUEL CELL Main Elements (Focus PEM) – FUEL CELL Operating Parameters & Efficiency – FUEL CELL Durability – FUEL CELL Hydration – FUEL CELL System – Main Elements including – FUEL CELL Control – FUEL CELL Cooling System – HYDROGEN Storage Systems – Key technologies, infrastructure – Fundamentals of cryogenic storage – Fundamentals of gaseous compressed storage – Control and safety standards – HYDROGEN Fuel station – FUEL CELL Testbeds – FUEL CELL Development Trends

Elective Subjects 2 | Lecture/Practical (IL) | Coursecode: M230680308

Language of instruction English

Internal Combustion Engines

3.00

ECTS

2.00

SWS

Introduction ICEs for Passenger cars – Deep Dive – Combustion System/Mixture Formation/Combustion- Gasoline / Diesel – Deep Dive – Exhaust aftertreatment – Focus on system understanding – Thermal Management and Waste heat recovery – ICE on the test bench – Combustion Diagnostics /Analysis – ICE Calibration Alternative Fuels Large ICEs – Specific Design Features – LE Combustion Systems – Gas Engines

Elective Subjects 2 | Lecture (VO) | Coursecode: M230680314

Language of instruction English

Methods of Product Developement & Production

3.00

ECTS

2.00

SWS

This lecture covers the theoretical fundamentals of development processes and their influence on production using real-world examples from industry. Topics include: production management, virtual product development, product data management, product engineering processes, simultaneous engineering and production systems.

Elective Subjects 2 | Lecture (VO) | Coursecode: M230680312

Language of instruction English

Rail Vehicle Dynamics

3.00

ECTS

2.00

SWS

Dynamics of railway vehicles

Master's Thesis | Master's Thesis (MA) | Coursecode: M230680401

Language of instruction English

Master's Thesis

29.00

ECTS

0.50

SWS

Independent composition of a technical / scientific thesis at Master’s level. The composition must conform to specific formal / content requirements as required for a technical / scientific publication.

Master's Thesis | Modul/Final Examination (FA) | Coursecode: M230680402

Language of instruction English

Master´s Exam

1.00

ECTS

0.00

SWS

The final examination that concludes a Master’s or Diploma degree programme is a general examination consisting of a Master’s or Diploma thesis and a board examination